Skip to content
Made in the USA

FK Bearing Female Mild Steel Rod End

Sale price $4.99 USD
Part # CFL3-FK
Select Thread Direction
Select Size

Spend $175 to get free shipping

You may also need

Pro-werks Plated Steel Jam Nuts, Grade 5

Pro-werks Seals It Rod End Washers, Pair

Pro-werks 1-1/8” OD X .058” (1.009" ID) Tube Size, Chromoly Steel 4130N Round Tube Adapter

Pro-werks Zinc Plated Safety Washers

Pro-werks Mild Steel Clevis Link Bracket

Shop with Confidence

  • Satisfaction Guaranteed
  • Personalized Service
  • Secure Checkout
  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • iDEAL
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

CFL3-FK/CF3-FK
Hole Diameter 3/16 in.
Ball Width 0.312 in.
20 Degrees of Misalignment
Radial Load Capacity 2079 LBS

CFL4-FK/CF4-FK
Hole Diameter 1/4 in.
Ball Width 0.375 in.
27 Degrees of Misalignment
Radial Load Capacity 3208 LBS

CFL5-FK/CF5-FK
Hole Diameter 5/16 in.
Ball Width 0.437 in.
22 Degrees of Misalignment
Radial Load Capacity 3824 LBS

CFL6-FK/CF6-FK
Hole Diameter 3/8 in.
Ball Width 0.500 in.
22 Degrees of Misalignment
Radial Load Capacity 5087 LBS

CFL7-FK/CF7-FK
Hole Diameter 7/16 in.
Ball Width 0.562 in.
21 Degrees of Misalignment
Radial Load Capacity 6385 LBS

CFL8-FK/CF8-FK
Hole Diameter 1/2 in.
Ball Width 0.625 in.
20 Degrees of Misalignment
Radial Load Capacity 9096 LBS

CFL10-FK/CF10-FK
Hole Diameter 5/8 in.
Ball Width 0.750 in.
26 Degrees of Misalignment
Radial Load Capacity 9713 LBS

CFL12-FK/CF12-FK
Hole Diameter 3/4 in.
Ball Width 0.875 in.
24 Degrees of Misalignment
Radial Load Capacity 14207 LBS

 

 

Two Piece Series (Mild Steel)

This series of rod ends consists of a low carbon steel body (zinc plated) and Alloy steel ball, heat treated and hard chrome plated. This construction allows the rod end body to carry a greater static load and offers greater misalignment capabilities.


What is Radial Static Load Capacity?

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of FK Bearing rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.


What is Axial Load Capacity?


Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for FK Bearing two piece rod ends, 10% for three piece rod ends.


What is Bearing Misalignment?


A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.

 

Shop All Items
Back to top