Pro-werks Silver Jacket Ultimate Push Pull Control Cable
Our Customers Also Bought
Overall Cable length is measured tip to tip of the 10-32 NF rods.
Silver Jacket Universal Push Pull Cables are available in 6" increments, so you can affordably get a length that you need for a proper fit! This on the shelf selection eliminates waiting for custom push pull cables.
How to Measure for Cable Length:
To determine the proper length for your application, measure the tip-to-tip (overall length) by using a flexible rule to snake through the actual intended cable route.
Quality Push Pull Cable Hardware is a must
Make the connection with this complete offering of cable mounting hardware; cable connectors, cable end fittings, cable clamps, push pull cable ends and cable levers.
This is the good stuff; high quality specialty pull cable hardware - not available at your local hardware store. It's what you would expect from the leading push pull cable manufacturer.
Click image to see the many mounting options available; including a complete selection of Cable Ends, Knobs, Handles and Levers.
Push Pull Control Cables - Smooth and Responsive
33 series Push Pull Cables are an integral part of most race vehicles; the unsung heroes of control. When your success depends on the performance of a part, it makes sense to choose the best.
That's where Pro-Werks comes in — with the trademark Silver Jacket Cables. Whether you are modulating the throttle, grabbing a gear, or pulling your 'chute; you will probably use a push-pull control cable to do it.
Push Pull Control Cables Popular Uses:
- Push Pull Throttle Cable
- Shutoff Control Valves
- B&M Shifter Cable
- Transmission Shift Cable
- Parachute Release
- Remote Battery Switches
- Universal Throttle Cable
- Hood Release Cable
- Choke Cable
- Parking Brake Cable
- Boat Throttle Cable
- Push Pull PTO Cable
- Emergency Brake Cable
- Boat Shift Cable
- Door and Hood Latches
- Homebuilt Aircraft Control Cables
As the Silver Jacket name implies, these 33 series cables come in the trademark silver color — that will complement any paint color scheme. The flexible housing measures only 0.325" outside diameter.
The Chassis Shop provides another bonus that you'll appreciate; Silver Jacket Cables are available in 6" increments, so you can affordably get a length that you need for a proper fit!
Silver Jacket Cables Deliver Maximum Flexibility — Smooth Operation
Fitted with efficient dynamic seals and requiring very little effort, these lightweight zero friction cables have a full circle of reinforcement wires to protect and support the inner liner — delivering positive load transfer with minimal lost motion.
Silver Jacket Cable Construction Overview
Solid wire core:
Armored multi-strand core:
Silver Jacket Cables are available with either a Solid Wire core or in our exclusive Ultimate series; featuring an armored flexible multi-strand, Stainless Steel core — the ultimate in push and pull cable construction.
Both are ideal for any cable operated application that requires pushing or pulling. These universal cables may be used as OEM push pull cable replacements and are well suited for extreme use environments. Any of these combinations should be considered as upgrade replacements for Teleflex Morse type cables.
Mounting Options:
- Clip Type (grooved housing each end)
Click image to learn more
- Bulkhead Type (7/16-20 NF threaded housing each end)
Click image to learn more
- Combo Type (7/16-20 NF threaded housing one end / grooved on the other)
Click image to learn more
- Chute Type (grooved housing one end / conduit the other)
Click image to learn more
Check out the impressive load ratings on each type — these aren't a flimsy garden equipment control cable that will let you down when you need it the most.
The Pro-Werks Silver Jacket Cables are proudly Made in the USA.
How to Measure for Cable Length:
To determine the proper length for your application, measure the tip-to-tip (overall length) by using a flexible ruler or a hose to snake through the actual intended cable route.
Quality Cable Hardware is a Must
Make the connection with this complete offering of cable mounting hardware; cable connectors, cable end fittings, cable clamps, push pull cable ends and cable levers.
This is the good stuff; high quality specialty pull cable hardware — not available at your local hardware store. It's what you would expect from the leading push pull cable manufacturer, and The Chassis Shop.
Frequently Asked Questions:
Q: How do I measure for total cable length?
A: Use a flexible ruler, or hose and snake it through the intended cable route. The cable length is measured from tip-to-tip (overall length) of the attaching ends, not the cable housing mounting points.
Q: My cable installation is close to the exhaust system. How do I protect it from the heat?
A: When installing a cable in an excessive heat environment, incorporating a heat deflector shield with adequate air gaps between the heat source and the cable housing is recommended.
PRO Tech Tip:
For the most efficient and longest cable operating life it is recommended to install the cable so the heaviest load is in a pulling motion whenever possible.
Complete Your Cockpit
Silver Jacket cables work hand-in-hand with these related components from The Chassis Shop:
- Pedal Kit — Pro-Werks dragster brake and throttle pedal assemblies
- Levers — Pro-Werks billet aluminum control levers for cable-operated shutoff, brake, and safety systems
- Battery Disconnect — remote battery disconnect switches operated by push-pull cables
- Weld Tabs & Brackets — chassis tabs and brackets for cable clamp and mounting hardware attachment
Silver Jacket Cable Installation Tips (PDF)
"My pulling tractor has four supercharged engines and I can depend on 12 Silver Jacket cables to control them with ease."
– As shared with us at the PRI Show
"Wow! Silver Jacket cables are smooth as butter."
