Push Pull Control Cables & Hardware — Pro-Werks Silver Jacket, Made in the USA

33 series Push Pull Cables are an integral part of most race vehicles — the unsung heroes of control. When your success depends on the performance of a part, it makes sense to choose the best. That’s where Pro-Werks comes in with the trademark Silver Jacket Cables. Whether you are modulating the throttle, grabbing a gear, or pulling your ‘chute — you will probably use a push-pull control cable to do it. Silver Jacket Cables are available in 6" increments, so you can affordably get the exact length you need for a proper fit.

Silver Jacket Push Pull Control Cables — Universal & Shifter Types

Available with either a Solid Wire core or the exclusive Ultimate series Armored flexible multi-strand Stainless Steel core — the ultimate in push and pull cable construction — throttle, shifter, parachute & more. Both are ideal upgrade replacements for Teleflex Morse type cables. The flexible housing measures only 0.325" outside diameter. Made in USA. Three mounting configurations available:

• Clip Type (grooved housing each end) — Silver Jacket Ultimate Push Pull Control Cable —  3" travel, 36 length options in 6" increments, rated 60# pull / 50# push
• Bulkhead Type (7/16-20 NF threaded housing each end) — Silver Jacket Ultimate Bulkhead Push Pull Control Cable — 2" travel, 20 length options in 6" increments, rated 60# pull / 50# push
• Combo Type (threaded one end / grooved the other) — Silver Jacket Ultimate Combo Push Pull Control Cable — 2" travel, 20 length options in 6" increments, rated 60# pull / 50# push

For Shifter-specific applications with up to 2" of travel and 20 length options in 6" increments — race, off-road & marine:

• Shifter Cable — Clip, Bulkhead & Combo Types — Silver Jacket Ultimate Shifter Push Pull Control Cable — rated 60# pull / 50# push, 6" increments

Parachute Release Cables — Chute Type & Complete Kits

Purpose-built for parachute release, fuel shutoff, and remote battery switch activation. Grooved housing on one end, conduit on the other. Solid wire core with exposed 0.075" stainless wire, an upgrade replacement for Teleflex Morse type cables. Compatible with Stroud, Simpson, RJS, White, Impact, and Deist parachutes. Made in USA

• Chute Type Cable — 3" Travel, Solid Wire Core — Silver Jacket Parachute Type Push Pull Control Cable — 2 length options (cut to finished length), rated 50# pull / 40# push.
• Complete Parachute Release Kit — Single or Dual Release — Silver Jacket Parachute Release Control Cable Kit — 2 length options (cut to finished length), rated 50# pull / 40# push. CNC aluminum release lever, clevis end, mounting hardware & weld-on tabs

Cable Flexibility & Construction

Fitted with efficient dynamic seals and requiring very little effort, these lightweight zero-friction cables have a full circle of reinforcement wires to protect and support the inner liner — delivering positive load transfer with minimal lost motion.

Solid wire core:

Armored multi-strand core:

Billet Aluminum Cable Lever — Chute & Fuel Shutoff Activation

A compact, purpose-built lever for activating parachutes, fuel shutoff valves, and fire suppression systems via Silver Jacket or Teleflex Morse type cables.

• 5" Long × 3/16" Thick, Satin Vibratory Finish, Two 3/16" Holes — Pro-Werks Universal Billet Aluminum Chute / Fuel Lever — parachute release, fuel shutoff & fire system activation, Made in USA

Cable Handles & Knobs — Billet Aluminum, Anodized Finishes

Complete your cable installation with Pro-Werks billet aluminum handles and knobs — CNC-machined for a positive grip and clean cockpit appearance. Available in 10-32 NF and 1/4-20 NC thread sizes to fit Silver Jacket and Teleflex Morse type cables.

• Ergo T Handle — Anodized Black or Red, Exclusive Retention Nubs — Pro-Werks Billet Aluminum Ergo T Handle — parachute release, fuel shutoff, fire suppression, battery disconnect & access door pull
• EZ Grip Knob — Anodized Black — Pro-Werks Billet Aluminum EZ Grip Knob — easy-to-grab design, compatible with Silver Jacket & Teleflex Morse cables

Cable End Fittings — Ball Joint, Clevis, Rod End & Solid Rod End

Pro-Werks offers a complete selection of cable end fittings for every connection type — all with 10-32 NF right hand threads on the cable attachment end, compatible with Silver Jacket and 33C series Teleflex Morse type cables.

• Quick Release Ball Joint — Spring-Loaded, Tool-Free Disconnect, 1/4" Ball — Pro-Werks Quick Release Ball Joint Cable End — 10-32 NF & 1/4-28 NF thread options, plated mild steel
• Fork Clevis — 3/16" Slot & Pin, Cotter Pin Included — Pro-Werks Fork Clevis Cable End — plated mild steel, 10-32 NF threads
• Rod End — 3/16" Hole, Ball Swivel for Misalignment — Pro-Werks Rod End Cable End — 0.312" ball width, plated mild steel, low operational drag
• Solid Rod End — Billet Aluminum, 3/16" Hole Expandable to 7/16" — Pro-Werks Billet Aluminum Solid Rod End Cable End — ideal for shifter cable connections, satin finish, Made in USA

Cable Clamps — Pro-Grip, Quick Disconnect & Saddle Mount

Secure your Silver Jacket or 33C clip-type cables with Pro-Werks precision cable clamps. All fit push-pull clip-type cables measuring 3/8" diameter at the steel housing end.

• Pro-Grip Clamp — Billet Aluminum, Silver Anodized, Half Clamp/ Full Clamp/ Dual Cable Clamp Options — Pro-Werks Billet Aluminum Pro-Grip Clip Type Cable Clamp — single-screw positive retention, CNC-machined, Made in USA
• Quick Disconnect Clamp — Stainless Steel, Tool-Free Flip Latch — Pro-Werks Swing Over Arm Quick Disconnect Clip Type Cable Clamp — adjustable mounting holes, two #10 fasteners, corrosion resistant
• Saddle Mount Clamp — Lowest Profile, Dimple-Lock Retention, Includes Shim Plate — Pro-Werks Saddle Mount with Shim Plate Clip Type Cable Clamp — plated mild steel, two #10 fasteners

Quality Cable Hardware — Not Available at Your Local Hardware Store

Make the connection with this complete offering of cable mounting hardware — cable connectors, cable end fittings, cable clamps, push pull cable ends, and cable levers. It’s what you would expect from the leading push pull cable manufacturer, and The Chassis Shop.

How to Measure for Cable Length

To determine the proper length for your application, measure the tip-to-tip (overall length) by using a flexible ruler or a hose to snake through the actual intended cable route. Cable length is measured from tip-to-tip of the attaching ends, not the cable housing mounting points.

Frequently Asked Questions

Q: How do I measure for total cable length?

A: Use a flexible ruler, or hose and snake it through the intended cable route. The cable length is measured from tip-to-tip (overall length) of the attaching ends, not the cable housing mounting points.

Q: My cable installation is close to the exhaust system. How do I protect it from the heat?

A: When installing a cable in an excessive heat environment, incorporating a heat deflector shield with adequate air gaps between the heat source and the cable housing is recommended.

PRO Tech Tip

For the most efficient and longest cable operating life, install the cable so the heaviest load is in a pulling motion whenever possible.

Complete Your Cockpit

Silver Jacket cables work hand-in-hand with these related components from The Chassis Shop:

• Levers — Pro-Werks billet aluminum control levers for cable-operated shutoff, brake, and safety systems
• Battery Disconnect — remote battery disconnect switches operated by push-pull cables
• Pedal Kit — Pro-Werks dragster brake and throttle pedal assemblies
• Weld Tabs & Brackets — chassis tabs and brackets for cable clamp and mounting hardware attachment

Silver Jacket Cable Installation Tips (PDF)

Download the Silver Jacket Cables Brochure (PDF)

Proudly Made in the USA.